As a frequent reader of linuxfordevices I happened to stumble upon the company Lanner Inc. Lanner produces network appliances for various environments and they offer quite the range of platforms.
Browsing their site I came across FW-7539 - containing an Intel Atom D510 and 4 GbE (Intel based!) network ports. It also features a pretty cool Mini PCIe with built-in SIM card reader if you want to use it as a 3G router/access-point. This beauty also contains 2 SATA ports and a Compact Flash port which makes storage a no brainer, sadly there is only room for one 2.5" drive though. This device has now replaced my old 800 MHz dual-Xeon router and I haven't looked back once.
The only annoyance I've found is that support for the sensor module Winbond W83627UHG is not included in mainline as of yet to my knowledge. To compensate for this the BIOS allows the CPU fan to be regulated with regards to a target temperature - it is still possible to monitor CPU temperature in Linux using coretemp, but the lack of extensive statistics annoy me to the degree that I'm probably going to manually apply the W83627UHG patch sooner or later.
Listing some stats for the interested:
lspci:
cat /proc/cpuinfo
Browsing their site I came across FW-7539 - containing an Intel Atom D510 and 4 GbE (Intel based!) network ports. It also features a pretty cool Mini PCIe with built-in SIM card reader if you want to use it as a 3G router/access-point. This beauty also contains 2 SATA ports and a Compact Flash port which makes storage a no brainer, sadly there is only room for one 2.5" drive though. This device has now replaced my old 800 MHz dual-Xeon router and I haven't looked back once.
The only annoyance I've found is that support for the sensor module Winbond W83627UHG is not included in mainline as of yet to my knowledge. To compensate for this the BIOS allows the CPU fan to be regulated with regards to a target temperature - it is still possible to monitor CPU temperature in Linux using coretemp, but the lack of extensive statistics annoy me to the degree that I'm probably going to manually apply the W83627UHG patch sooner or later.
Listing some stats for the interested:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 03:40:32 UTC 2011
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-root ro console=ttyS0,115200n8 console=ttyS0,115200n8 quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a400 (usable)
[ 0.000000] BIOS-e820: 000000000009a400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f580000 (usable)
[ 0.000000] BIOS-e820: 000000007f580000 - 000000007f58e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f58e000 - 000000007f5d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f5d0000 - 000000007f5e0000 (reserved)
[ 0.000000] BIOS-e820: 000000007f5ed000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7f580 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F600000 mask FFFF00000 write-through
[ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000007f580000
[ 0.000000] 0000000000 - 007f400000 page 2M
[ 0.000000] 007f400000 - 007f580000 page 4k
[ 0.000000] kernel direct mapping tables up to 7f580000 @ 10000-14000
[ 0.000000] RAMDISK: 37667000 - 37fef222
[ 0.000000] ACPI: RSDP 00000000000f9c60 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 000000007f580000 0003C (v01 122810 RSDT1016 20101228 MSFT 00000097)
[ 0.000000] ACPI: FACP 000000007f580200 00084 (v01 122810 FACP1016 20101228 MSFT 00000097)
[ 0.000000] ACPI: DSDT 000000007f580440 06415 (v01 1AAAA 1AAAA000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 000000007f58e000 00040
[ 0.000000] ACPI: APIC 000000007f580390 0006C (v01 122810 APIC1016 20101228 MSFT 00000097)
[ 0.000000] ACPI: MCFG 000000007f580400 0003C (v01 122810 OEMMCFG 20101228 MSFT 00000097)
[ 0.000000] ACPI: OEMB 000000007f58e040 00082 (v01 122810 OEMB1016 20101228 MSFT 00000097)
[ 0.000000] ACPI: HPET 000000007f58a440 00038 (v01 122810 OEMHPET 20101228 MSFT 00000097)
[ 0.000000] ACPI: GSCI 000000007f58e0d0 02024 (v01 122810 GMCHSCI 20101228 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000007f580000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000007f580000
[ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 0000000000029eaf] pages 10
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007f580000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000168a414] TEXT DATA BSS ==> [0001000000 - 000168a414]
[ 0.000000] #3 [0037667000 - 0037fef222] RAMDISK ==> [0037667000 - 0037fef222]
[ 0.000000] #4 [000009a400 - 0000100000] BIOS reserved ==> [000009a400 - 0000100000]
[ 0.000000] #5 [000168b000 - 000168b1d3] BRK ==> [000168b000 - 000168b1d3]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009a
[ 0.000000] 0: 0x00000100 -> 0x0007f580
[ 0.000000] On node 0 totalpages: 521482
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 106 pages reserved
[ 0.000000] DMA zone: 3816 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7076 pages used for memmap
[ 0.000000] DMA32 zone: 510428 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514244
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/system-root ro console=ttyS0,115200n8 console=ttyS0,115200n8 quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2039992k/2086400k available (3079k kernel code, 472k absent, 45936k reserved, 1892k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1666.704 MHz processor.
[ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 3333.40 BogoMIPS (lpj=6666816)
[ 0.004056] Security Framework initialized
[ 0.004064] SELinux: Disabled at boot.
[ 0.004499] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008769] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.009615] Mount-cache hash table entries: 256
[ 0.009910] Initializing cgroup subsys ns
[ 0.009920] Initializing cgroup subsys cpuacct
[ 0.009929] Initializing cgroup subsys devices
[ 0.009934] Initializing cgroup subsys freezer
[ 0.009939] Initializing cgroup subsys net_cls
[ 0.009986] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.009992] CPU: L2 cache: 512K
[ 0.009998] CPU 0/0x0 -> Node 0
[ 0.010003] CPU: Physical Processor ID: 0
[ 0.010006] CPU: Processor Core ID: 0
[ 0.010013] mce: CPU supports 5 MCE banks
[ 0.010026] CPU0: Thermal monitoring enabled (TM1)
[ 0.010034] using mwait in idle threads.
[ 0.010038] Performance Events: Atom events, Intel PMU driver.
[ 0.010048] ... version: 3
[ 0.010052] ... bit width: 40
[ 0.010056] ... generic registers: 2
[ 0.010060] ... value mask: 000000ffffffffff
[ 0.010064] ... max period: 000000007fffffff
[ 0.010068] ... fixed-purpose events: 3
[ 0.010072] ... event mask: 0000000700000003
[ 0.011499] ACPI: Core revision 20090903
[ 0.024150] Setting APIC routing to flat
[ 0.024490] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064977] CPU0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.068001] Booting processor 1 APIC 0x2 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU 1/0x2 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.152055] CPU1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.152071] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156183] Booting processor 2 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#2
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU 2/0x1 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU2: Thermal monitoring enabled (TM1)
[ 0.244109] CPU2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.244124] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.248235] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.008000] Initializing CPU#3
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU 3/0x3 -> Node 0
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU3: Thermal monitoring enabled (TM1)
[ 0.336052] CPU3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz stepping 0a
[ 0.336065] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340029] Brought up 4 CPUs
[ 0.340035] Total of 4 processors activated (13333.47 BogoMIPS).
[ 0.341240] CPU0 attaching sched-domain:
[ 0.341250] domain 0: span 0,2 level SIBLING
[ 0.341255] groups: 0 (cpu_power = 589) 2 (cpu_power = 589)
[ 0.341269] domain 1: span 0,2 level MC
[ 0.341274] groups: 0,2 (cpu_power = 1178)
[ 0.341283] domain 2: span 0-3 level CPU
[ 0.341288] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 0.341306] CPU1 attaching sched-domain:
[ 0.341311] domain 0: span 1,3 level SIBLING
[ 0.341316] groups: 1 (cpu_power = 589) 3 (cpu_power = 589)
[ 0.341328] domain 1: span 1,3 level MC
[ 0.341332] groups: 1,3 (cpu_power = 1178)
[ 0.341342] domain 2: span 0-3 level CPU
[ 0.341346] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 0.341361] CPU2 attaching sched-domain:
[ 0.341366] domain 0: span 0,2 level SIBLING
[ 0.341371] groups: 2 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.341383] domain 1: span 0,2 level MC
[ 0.341388] groups: 0,2 (cpu_power = 1178)
[ 0.341397] domain 2: span 0-3 level CPU
[ 0.341402] groups: 0,2 (cpu_power = 1178) 1,3 (cpu_power = 1178)
[ 0.341416] CPU3 attaching sched-domain:
[ 0.341421] domain 0: span 1,3 level SIBLING
[ 0.341426] groups: 3 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.341438] domain 1: span 1,3 level MC
[ 0.341443] groups: 1,3 (cpu_power = 1178)
[ 0.341452] domain 2: span 0-3 level CPU
[ 0.341457] groups: 1,3 (cpu_power = 1178) 0,2 (cpu_power = 1178)
[ 0.341771] devtmpfs: initialized
[ 0.346782] regulator: core version 0.5
[ 0.346782] NET: Registered protocol family 16
[ 0.346782] ACPI: bus type pci registered
[ 0.346782] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.346782] PCI: Not using MMCONFIG.
[ 0.346782] PCI: Using configuration type 1 for base access
[ 0.348523] bio: create slab at 0
[ 0.349074] ACPI: EC: Look up EC in DSDT
[ 0.356439] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.367438] ACPI: Interpreter enabled
[ 0.367448] ACPI: (supports S0 S1 S4 S5)
[ 0.367494] ACPI: Using IOAPIC for interrupt routing
[ 0.367603] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.374893] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.385607] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.402161] ACPI Warning: Incorrect checksum in table [OEMB] - 8A, should be 83 (20090903/tbutils-314)
[ 0.403246] ACPI: No dock devices found.
[ 0.404792] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.404946] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe600000-0xfe67ffff]
[ 0.404955] pci 0000:00:02.0: reg 14 io port: [0x9400-0x9407]
[ 0.404963] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.404971] pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe500000-0xfe5fffff]
[ 0.405014] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe480000-0xfe4fffff]
[ 0.405104] pci 0000:00:1a.0: reg 20 io port: [0x9800-0x981f]
[ 0.405158] pci 0000:00:1a.1: reg 20 io port: [0x9480-0x949f]
[ 0.405219] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe6fec00-0xfe6fefff]
[ 0.405272] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.405280] pci 0000:00:1a.7: PME# disabled
[ 0.405347] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.405353] pci 0000:00:1c.0: PME# disabled
[ 0.405422] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.405428] pci 0000:00:1c.1: PME# disabled
[ 0.405497] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.405503] pci 0000:00:1c.2: PME# disabled
[ 0.405576] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.405583] pci 0000:00:1c.3: PME# disabled
[ 0.405653] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.405659] pci 0000:00:1c.5: PME# disabled
[ 0.405710] pci 0000:00:1d.0: reg 20 io port: [0xa000-0xa01f]
[ 0.405764] pci 0000:00:1d.1: reg 20 io port: [0x9c00-0x9c1f]
[ 0.405818] pci 0000:00:1d.2: reg 20 io port: [0x9880-0x989f]
[ 0.405880] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe6ff000-0xfe6ff3ff]
[ 0.405932] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.405939] pci 0000:00:1d.7: PME# disabled
[ 0.406069] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.406076] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 0.406084] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 001f)
[ 0.406091] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 4700 (mask 000f)
[ 0.406143] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.406152] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.406162] pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
[ 0.406171] pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
[ 0.406181] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.406238] pci 0000:00:1f.2: reg 10 io port: [0xa400-0xa407]
[ 0.406247] pci 0000:00:1f.2: reg 14 io port: [0xac00-0xac03]
[ 0.406256] pci 0000:00:1f.2: reg 18 io port: [0xa880-0xa887]
[ 0.406265] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
[ 0.406274] pci 0000:00:1f.2: reg 20 io port: [0xa480-0xa49f]
[ 0.406284] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe6ff800-0xfe6fffff]
[ 0.406315] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.406321] pci 0000:00:1f.2: PME# disabled
[ 0.406350] pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe6ff400-0xfe6ff4ff]
[ 0.406370] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.406464] pci 0000:02:00.0: reg 10 32bit mmio: [0xfe7e0000-0xfe7fffff]
[ 0.406487] pci 0000:02:00.0: reg 18 io port: [0xbc00-0xbc1f]
[ 0.406502] pci 0000:02:00.0: reg 1c 32bit mmio: [0xfe7dc000-0xfe7dffff]
[ 0.406586] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.406595] pci 0000:02:00.0: PME# disabled
[ 0.412107] pci 0000:00:1c.0: bridge io port: [0xb000-0xbfff]
[ 0.412115] pci 0000:00:1c.0: bridge 32bit mmio: [0xfe700000-0xfe7fffff]
[ 0.412198] pci 0000:03:00.0: reg 10 32bit mmio: [0xfe8e0000-0xfe8fffff]
[ 0.412222] pci 0000:03:00.0: reg 18 io port: [0xcc00-0xcc1f]
[ 0.412236] pci 0000:03:00.0: reg 1c 32bit mmio: [0xfe8dc000-0xfe8dffff]
[ 0.412322] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.412331] pci 0000:03:00.0: PME# disabled
[ 0.420103] pci 0000:00:1c.1: bridge io port: [0xc000-0xcfff]
[ 0.420110] pci 0000:00:1c.1: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
[ 0.420190] pci 0000:04:00.0: reg 10 32bit mmio: [0xfe9e0000-0xfe9fffff]
[ 0.420213] pci 0000:04:00.0: reg 18 io port: [0xdc00-0xdc1f]
[ 0.420228] pci 0000:04:00.0: reg 1c 32bit mmio: [0xfe9dc000-0xfe9dffff]
[ 0.420313] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[ 0.420322] pci 0000:04:00.0: PME# disabled
[ 0.428102] pci 0000:00:1c.2: bridge io port: [0xd000-0xdfff]
[ 0.428110] pci 0000:00:1c.2: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
[ 0.428189] pci 0000:05:00.0: reg 10 32bit mmio: [0xfeae0000-0xfeafffff]
[ 0.428213] pci 0000:05:00.0: reg 18 io port: [0xec00-0xec1f]
[ 0.428228] pci 0000:05:00.0: reg 1c 32bit mmio: [0xfeadc000-0xfeadffff]
[ 0.428313] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.428322] pci 0000:05:00.0: PME# disabled
[ 0.436103] pci 0000:00:1c.3: bridge io port: [0xe000-0xefff]
[ 0.436110] pci 0000:00:1c.3: bridge 32bit mmio: [0xfea00000-0xfeafffff]
[ 0.436171] pci 0000:06:00.0: reg 10 32bit mmio: [0xfebf0000-0xfebfffff]
[ 0.436242] pci 0000:06:00.0: PME# supported from D0 D3hot
[ 0.436250] pci 0000:06:00.0: PME# disabled
[ 0.444086] pci 0000:00:1c.5: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
[ 0.444143] pci 0000:00:1e.0: transparent bridge
[ 0.444190] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.444467] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.444661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.444780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
[ 0.444897] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
[ 0.445020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
[ 0.445146] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.459374] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 0.459603] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.459824] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.460063] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.460292] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.460514] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.460735] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.460957] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.461180] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.461209] vgaarb: loaded
[ 0.461269] PCI: Using ACPI for IRQ routing
[ 0.461269] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.461269] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.468038] Switching to clocksource tsc
[ 0.470460] pnp: PnP ACPI init
[ 0.470508] ACPI: bus type pnp registered
[ 0.479672] pnp: PnP ACPI: found 15 devices
[ 0.479678] ACPI: ACPI bus type pnp unregistered
[ 0.479724] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
[ 0.479732] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
[ 0.479753] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.479760] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.479767] system 00:09: ioport range 0x500-0x53f has been reserved
[ 0.479775] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.479782] system 00:09: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.479790] system 00:09: iomem range 0xfed40000-0xfed8ffff has been reserved
[ 0.479824] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.479832] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.479846] system 00:0c: ioport range 0xa00-0xa0f has been reserved
[ 0.479852] system 00:0c: ioport range 0xa10-0xa1f has been reserved
[ 0.479865] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.479882] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.479889] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.479896] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.479903] system 00:0e: iomem range 0x100000-0x7f6fffff could not be reserved
[ 0.479911] system 00:0e: iomem range 0xfed90000-0xffffffff could not be reserved
[ 0.485144] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.485152] pci 0000:00:1c.0: IO window: 0xb000-0xbfff
[ 0.485161] pci 0000:00:1c.0: MEM window: 0xfe700000-0xfe7fffff
[ 0.485169] pci 0000:00:1c.0: PREFETCH window: 0x00000080000000-0x000000801fffff
[ 0.485178] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.485184] pci 0000:00:1c.1: IO window: 0xc000-0xcfff
[ 0.485192] pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff
[ 0.485199] pci 0000:00:1c.1: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.485209] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.485215] pci 0000:00:1c.2: IO window: 0xd000-0xdfff
[ 0.485222] pci 0000:00:1c.2: MEM window: 0xfe900000-0xfe9fffff
[ 0.485229] pci 0000:00:1c.2: PREFETCH window: 0x00000080400000-0x000000805fffff
[ 0.485239] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.485245] pci 0000:00:1c.3: IO window: 0xe000-0xefff
[ 0.485252] pci 0000:00:1c.3: MEM window: 0xfea00000-0xfeafffff
[ 0.485260] pci 0000:00:1c.3: PREFETCH window: 0x00000080600000-0x000000807fffff
[ 0.485269] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:06
[ 0.485275] pci 0000:00:1c.5: IO window: 0x1000-0x1fff
[ 0.485283] pci 0000:00:1c.5: MEM window: 0xfeb00000-0xfebfffff
[ 0.485290] pci 0000:00:1c.5: PREFETCH window: 0x00000080800000-0x000000809fffff
[ 0.485299] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.485303] pci 0000:00:1e.0: IO window: disabled
[ 0.485310] pci 0000:00:1e.0: MEM window: disabled
[ 0.485316] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.485340] alloc irq_desc for 22 on node -1
[ 0.485345] alloc kstat_irqs on node -1
[ 0.485359] pci 0000:00:1c.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.485367] pci 0000:00:1c.0: setting latency timer to 64
[ 0.485380] alloc irq_desc for 23 on node -1
[ 0.485384] alloc kstat_irqs on node -1
[ 0.485393] pci 0000:00:1c.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 0.485400] pci 0000:00:1c.1: setting latency timer to 64
[ 0.485413] alloc irq_desc for 20 on node -1
[ 0.485417] alloc kstat_irqs on node -1
[ 0.485425] pci 0000:00:1c.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
[ 0.485432] pci 0000:00:1c.2: setting latency timer to 64
[ 0.485445] alloc irq_desc for 21 on node -1
[ 0.485449] alloc kstat_irqs on node -1
[ 0.485457] pci 0000:00:1c.3: PCI INT D -> GSI 21 (level, low) -> IRQ 21
[ 0.485465] pci 0000:00:1c.3: setting latency timer to 64
[ 0.485476] pci 0000:00:1c.5: enabling device (0106 -> 0107)
[ 0.485484] pci 0000:00:1c.5: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 0.485491] pci 0000:00:1c.5: setting latency timer to 64
[ 0.485501] pci 0000:00:1e.0: setting latency timer to 64
[ 0.485510] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.485516] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.485523] pci_bus 0000:02: resource 0 io: [0xb000-0xbfff]
[ 0.485528] pci_bus 0000:02: resource 1 mem: [0xfe700000-0xfe7fffff]
[ 0.485534] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff]
[ 0.485541] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.485546] pci_bus 0000:03: resource 1 mem: [0xfe800000-0xfe8fffff]
[ 0.485552] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.485559] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff]
[ 0.485564] pci_bus 0000:04: resource 1 mem: [0xfe900000-0xfe9fffff]
[ 0.485570] pci_bus 0000:04: resource 2 pref mem [0x80400000-0x805fffff]
[ 0.485576] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
[ 0.485582] pci_bus 0000:05: resource 1 mem: [0xfea00000-0xfeafffff]
[ 0.485588] pci_bus 0000:05: resource 2 pref mem [0x80600000-0x807fffff]
[ 0.485594] pci_bus 0000:06: resource 0 io: [0x1000-0x1fff]
[ 0.485600] pci_bus 0000:06: resource 1 mem: [0xfeb00000-0xfebfffff]
[ 0.485606] pci_bus 0000:06: resource 2 pref mem [0x80800000-0x809fffff]
[ 0.485612] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.485618] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.485699] NET: Registered protocol family 2
[ 0.485988] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.487919] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.490925] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.491630] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.491637] TCP reno registered
[ 0.491938] NET: Registered protocol family 1
[ 0.491980] pci 0000:00:02.0: Boot video device
[ 0.492255] Unpacking initramfs...
[ 0.970392] Freeing initrd memory: 9760k freed
[ 0.978959] audit: initializing netlink socket (disabled)
[ 0.978985] type=2000 audit(1297714906.975:1): initialized
[ 0.985003] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.988529] VFS: Disk quotas dquot_6.5.2
[ 0.988686] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.988886] msgmni has been set to 4003
[ 0.989480] alg: No test for stdrng (krng)
[ 0.989628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.989635] io scheduler noop registered
[ 0.989639] io scheduler anticipatory registered
[ 0.989643] io scheduler deadline registered
[ 0.989722] io scheduler cfq registered (default)
[ 0.989967] alloc irq_desc for 24 on node -1
[ 0.989973] alloc kstat_irqs on node -1
[ 0.989993] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.990005] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.990183] alloc irq_desc for 25 on node -1
[ 0.990187] alloc kstat_irqs on node -1
[ 0.990200] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.990211] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.990387] alloc irq_desc for 26 on node -1
[ 0.990392] alloc kstat_irqs on node -1
[ 0.990404] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.990415] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.990591] alloc irq_desc for 27 on node -1
[ 0.990596] alloc kstat_irqs on node -1
[ 0.990608] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.990619] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.990794] alloc irq_desc for 28 on node -1
[ 0.990798] alloc kstat_irqs on node -1
[ 0.990811] pcieport 0000:00:1c.5: irq 28 for MSI/MSI-X
[ 0.990822] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.994841] Linux agpgart interface v0.103
[ 0.994874] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 0.995137] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 1.008580] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.008693] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.008830] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.008966] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.009441] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.009660] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.010084] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.010244] PNP: No PS/2 controller found. Probing ports directly.
[ 1.013187] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.013215] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.013467] mice: PS/2 mouse device common for all mice
[ 1.013563] rtc_cmos 00:03: RTC can wake from S4
[ 1.013663] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.013699] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.013735] cpuidle: using governor ladder
[ 1.013740] cpuidle: using governor menu
[ 1.013750] No iBFT detected.
[ 1.014421] TCP cubic registered
[ 1.014699] NET: Registered protocol family 10
[ 1.015771] lo: Disabled Privacy Extensions
[ 1.016368] Mobile IPv6
[ 1.016374] NET: Registered protocol family 17
[ 1.016634] PM: Resume from disk failed.
[ 1.016657] registered taskstats version 1
[ 1.017372] rtc_cmos 00:03: setting system clock to 2011-02-14 20:21:48 UTC (1297714908)
[ 1.017448] Initalizing network drop monitor service
[ 1.017538] Freeing unused kernel memory: 592k freed
[ 1.017817] Write protecting the kernel read-only data: 4236k
[ 1.055283] udev[76]: starting version 164
[ 1.208057] usbcore: registered new interface driver usbfs
[ 1.208137] usbcore: registered new interface driver hub
[ 1.208286] usbcore: registered new device driver usb
[ 1.216817] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.216891] alloc irq_desc for 18 on node -1
[ 1.216899] alloc kstat_irqs on node -1
[ 1.216922] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.216970] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.216980] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.220591] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.220652] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.224641] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.224829] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6fec00
[ 1.228043] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 1.228051] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 1.228176] alloc irq_desc for 16 on node -1
[ 1.228184] alloc kstat_irqs on node -1
[ 1.228208] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.228268] e1000e 0000:02:00.0: setting latency timer to 64
[ 1.228555] alloc irq_desc for 29 on node -1
[ 1.228563] alloc kstat_irqs on node -1
[ 1.228585] e1000e 0000:02:00.0: irq 29 for MSI/MSI-X
[ 1.228593] alloc irq_desc for 30 on node -1
[ 1.228599] alloc kstat_irqs on node -1
[ 1.228610] e1000e 0000:02:00.0: irq 30 for MSI/MSI-X
[ 1.228618] alloc irq_desc for 31 on node -1
[ 1.228624] alloc kstat_irqs on node -1
[ 1.228635] e1000e 0000:02:00.0: irq 31 for MSI/MSI-X
[ 1.240531] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.240594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.240601] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.240607] usb usb1: Product: EHCI Host Controller
[ 1.240611] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.240616] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.240812] usb usb1: configuration #1 chosen from 1 choice
[ 1.240886] hub 1-0:1.0: USB hub found
[ 1.240906] hub 1-0:1.0: 4 ports detected
[ 1.241050] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.241091] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.241098] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.241122] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.241175] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.245074] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.245117] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe6ff000
[ 1.260523] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.260580] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.260586] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.260591] usb usb2: Product: EHCI Host Controller
[ 1.260596] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.260601] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.260793] usb usb2: configuration #1 chosen from 1 choice
[ 1.260873] hub 2-0:1.0: USB hub found
[ 1.260892] hub 2-0:1.0: 6 ports detected
[ 1.270725] SCSI subsystem initialized
[ 1.315728] libata version 3.00 loaded.
[ 1.319556] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.319686] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.319709] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.319719] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.319763] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.319848] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800
[ 1.319993] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.320003] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.320011] usb usb3: Product: UHCI Host Controller
[ 1.320017] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.320024] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.320363] usb usb3: configuration #1 chosen from 1 choice
[ 1.320488] hub 3-0:1.0: USB hub found
[ 1.320599] hub 3-0:1.0: 2 ports detected
[ 1.320805] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.320830] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.320841] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.320879] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.320969] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480
[ 1.321073] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.321080] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.321086] usb usb4: Product: UHCI Host Controller
[ 1.321090] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.321095] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.321310] usb usb4: configuration #1 chosen from 1 choice
[ 1.321384] hub 4-0:1.0: USB hub found
[ 1.321401] hub 4-0:1.0: 2 ports detected
[ 1.321536] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.321553] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.321559] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.321582] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.321623] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a000
[ 1.321710] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.321717] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.321722] usb usb5: Product: UHCI Host Controller
[ 1.321727] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.321732] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.321968] usb usb5: configuration #1 chosen from 1 choice
[ 1.322083] hub 5-0:1.0: USB hub found
[ 1.322110] hub 5-0:1.0: 2 ports detected
[ 1.322290] alloc irq_desc for 19 on node -1
[ 1.322298] alloc kstat_irqs on node -1
[ 1.322320] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.322344] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.322353] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.322390] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.322477] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00
[ 1.322605] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.322615] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.322622] usb usb6: Product: UHCI Host Controller
[ 1.322629] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.322637] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.322935] usb usb6: configuration #1 chosen from 1 choice
[ 1.323071] hub 6-0:1.0: USB hub found
[ 1.323099] hub 6-0:1.0: 2 ports detected
[ 1.323279] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.323303] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.323312] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.323345] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.323408] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009880
[ 1.323544] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.323553] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.323561] usb usb7: Product: UHCI Host Controller
[ 1.323567] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
[ 1.323574] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.323873] usb usb7: configuration #1 chosen from 1 choice
[ 1.323999] hub 7-0:1.0: USB hub found
[ 1.324029] hub 7-0:1.0: 2 ports detected
[ 1.333945] ata_piix 0000:00:1f.1: version 2.13
[ 1.333981] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.334079] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.334308] scsi0 : ata_piix
[ 1.334685] scsi1 : ata_piix
[ 1.339430] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.339440] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.340694] ata2: port disabled. ignoring.
[ 1.341521] ahci 0000:00:1f.2: version 3.0
[ 1.341555] ahci 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[ 1.341644] alloc irq_desc for 32 on node -1
[ 1.341650] alloc kstat_irqs on node -1
[ 1.341675] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 1.341742] ahci: SSS flag set, parallel bus scan disabled
[ 1.341783] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.341792] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
[ 1.341801] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.359096] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:90:0b:1d:19:52
[ 1.359103] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.359192] 0000:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: ffffff-0ff
[ 1.359278] alloc irq_desc for 17 on node -1
[ 1.359283] alloc kstat_irqs on node -1
[ 1.359298] e1000e 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.359342] e1000e 0000:03:00.0: setting latency timer to 64
[ 1.359525] alloc irq_desc for 33 on node -1
[ 1.359530] alloc kstat_irqs on node -1
[ 1.359552] e1000e 0000:03:00.0: irq 33 for MSI/MSI-X
[ 1.360168] scsi2 : ahci
[ 1.360453] scsi3 : ahci
[ 1.360681] scsi4 : ahci
[ 1.360999] ata3: SATA max UDMA/133 abar m2048@0xfe6ff800 port 0xfe6ff900 irq 32
[ 1.361029] ata4: SATA max UDMA/133 abar m2048@0xfe6ff800 port 0xfe6ff980 irq 32
[ 1.361036] ata5: SATA max UDMA/133 abar m2048@0xfe6ff800 port 0xfe6ffa00 irq 32
[ 1.478792] 0000:03:00.0: eth1: (PCI Express:2.5GB/s:Width x1) 00:90:0b:1d:19:53
[ 1.478801] 0000:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
[ 1.478891] 0000:03:00.0: eth1: MAC: 4, PHY: 8, PBA No: ffffff-0ff
[ 1.478970] e1000e 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.479012] e1000e 0000:04:00.0: setting latency timer to 64
[ 1.479198] alloc irq_desc for 34 on node -1
[ 1.479204] alloc kstat_irqs on node -1
[ 1.479231] e1000e 0000:04:00.0: irq 34 for MSI/MSI-X
[ 1.600336] 0000:04:00.0: eth2: (PCI Express:2.5GB/s:Width x1) 00:90:0b:1d:19:54
[ 1.600343] 0000:04:00.0: eth2: Intel(R) PRO/1000 Network Connection
[ 1.600434] 0000:04:00.0: eth2: MAC: 4, PHY: 8, PBA No: ffffff-0ff
[ 1.600517] e1000e 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.600562] e1000e 0000:05:00.0: setting latency timer to 64
[ 1.600748] alloc irq_desc for 35 on node -1
[ 1.600753] alloc kstat_irqs on node -1
[ 1.600779] e1000e 0000:05:00.0: irq 35 for MSI/MSI-X
[ 1.677528] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.720493] 0000:05:00.0: eth3: (PCI Express:2.5GB/s:Width x1) 00:90:0b:1d:19:55
[ 1.720501] 0000:05:00.0: eth3: Intel(R) PRO/1000 Network Connection
[ 1.720593] 0000:05:00.0: eth3: MAC: 4, PHY: 8, PBA No: ffffff-0ff
[ 2.013528] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.517525] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.518026] ata5.00: ATA-8: FUJITSU MHZ2120BH G1, 00810009, max UDMA/100
[ 2.518033] ata5.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.518707] ata5.00: configured for UDMA/100
[ 2.532276] scsi 4:0:0:0: Direct-Access ATA FUJITSU MHZ2120B 0081 PQ: 0 ANSI: 5
[ 2.547316] sd 4:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.547566] sd 4:0:0:0: [sda] Write Protect is off
[ 2.547576] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.547683] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.548281] sda: sda1 sda2
[ 2.573496] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.808038] device-mapper: uevent: version 1.0.3
[ 2.808956] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 3.177169] PM: Starting manual resume from disk
[ 3.177177] PM: Resume from partition 254:1
[ 3.177181] PM: Checking hibernation image.
[ 3.177435] PM: Error -22 checking image file
[ 3.177439] PM: Resume from disk failed.
[ 3.284362] EXT4-fs (dm-0): mounted filesystem with ordered data mode
[ 4.366456] udev[387]: starting version 164
[ 4.660768] processor LNXCPU:00: registered as cooling_device0
[ 4.662480] processor LNXCPU:01: registered as cooling_device1
[ 4.662708] processor LNXCPU:02: registered as cooling_device2
[ 4.662895] processor LNXCPU:03: registered as cooling_device3
[ 4.771857] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 4.771875] ACPI: Power Button [PWRB]
[ 4.772107] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 4.772123] ACPI: Power Button [PWRF]
[ 4.892066] input: PC Speaker as /devices/platform/pcspkr/input/input3
lspci:
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge (rev 02)
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 04)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 04)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 04)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 04)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04)
02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
03:00.0 Ethernet controller: Intel Corporation 82583V Gigabit Network Connection
04:00.0 Ethernet controller: Intel Corporation 82583V Gigabit Network Connection
05:00.0 Ethernet controller: Intel Corporation 82583V Gigabit Network Connection
cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
stepping : 10
cpu MHz : 1666.704
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm
bogomips : 3333.40
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
stepping : 10
cpu MHz : 1666.704
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm
bogomips : 3333.36
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 2
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
stepping : 10
cpu MHz : 1666.704
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm
bogomips : 3333.34
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 3
vendor_id : GenuineIntel
cpu family : 6
model : 28
model name : Intel(R) Atom(TM) CPU D510 @ 1.66GHz
stepping : 10
cpu MHz : 1666.704
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 2
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm
bogomips : 3333.35
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
Comments
Post a Comment