Skip to main content

Success!

Today went really well, the project is almost finished!

To recap the problems we had yesterday:

  • The PORTC issue was the JTAG interface messing around, disabling the JTAGEN fuse solved that problem

  • The LCD-display had the wrong contrast wired - the example schematic was interpreted to specify 4V on Vo, while infact it wanted a voltage drop of 4V from Vdd. Wiring 1V to it solved everything nicely.


After debugging some minor bugs, adding game logic and simple inputs everything seems to work good enough to assemble to a PCB. Stay tuned!

(Sorry for the lousy photos, my iPhone cannot do any better :()
[gallery]

Comments

Popular posts from this blog

Buying an IBM Mainframe

I bought an IBM mainframe for personal use. I am doing this for learning and figuring out how it works. If you are curious about what goes into this process, I hope this post will interest you.

I am not the first one by far to do something like this. There are some people on the internet that I know have their own personal mainframes, and I have drawn inspiration from each and every one of them. You should follow them if you are interested in these things:
@connorkrukosky@sebastian_wind@faultywarrior@kevinbowling1 This post is about buying an IBM z114 mainframe (picture 1) but should translate well to any of the IBM mainframes from z9 to z14.

What to expect of the process Buying a mainframe takes time. I never spent so much time on a purchase before. In fact - I purchased my first apartment with probably less planning and research. Compared to buying an apartment you have no guard rails. You are left to your own devices to ensure the state of whatever thing you are buying as it likely…

The fake FICON board - Fejkon

The latest project I've been working on is a custom card that will allow me to interface any mainframe using the FICON protocol. I have a lot of ideas on how this could help a lot of hobbyists out there, and possibly folks doing development for mainframes as well. For my own purposes, it would allow me to not be reliant on my (still broken) DS6800 array.



Powering a mainframe

The last few days have been eventful. I was contacted by the datacenter that the mainframe's cage is now ready for moving in, and the power has been made available. Very exciting! I grabbed my home-made power cables (more on that later) and my best screwdrivers and set off to the datacenter.


The datacenter staff, not needing a forklift in their day-to-day, had managed to solicit the services of a forklift, the associated operator, and some very handy folks to help navigate the mainframe from the storage space to its final location.



After some intense period of fighting the inclination of the road between the storage facility and the cage (and a door that was a bit too small) it was finally in place. Incidentally we were forced to trust the wheels on this pretty rough floor. I did not expect it to roll that well on raw concrete, I was pleasantly surprised. This thing is a tank!

Now, everybody wanted to see if it was working. My machine did not come with a power cable so I had to so…